SAGEM F@st™ 1201/1241 V2
Safety instructions
13
5 SAFETY InSTRUCTIonS
Environment
the modem should be installed and used inside a building.
the room temperature should not exceed 45ºC.
The modem can be placed on a desktop or fixed vertically in its wall mounting.
the modem should not be exposed to strong sunlight or placed near a substantial
source of heat.
the modem should not be placed in an environment where it would be subjected to
considerable steam condensation.
the modem should not be exposed to splashes of water.
the modem’s casing should not be covered.
the modem and its peripherals should not be used for outdoor transmissions.
power supply source
the modem’s mains adapter should not be covered.
the modem comes with its own mains adapter. it should not be used with another
adapter.
this class ii adapter does not need to be grounded (earthed). the connection to the
electrical network should comply with the indications given on the label.
use a readily accessible mains outlet located near the modem. the power supply cord
is 2 m long.
arrange the power supply cord in such a way as to avoid any accidental power cut to
the modem.
the modem is designed to be connected to a gg- (ground-to-ground) or gn- (ground-
to-neutral) type power supply network.
the modem is not designed to be connected to an electrical installation with it type
diagram (neutral connected to earth through an impedance).
protection against short-circuits and leaks between phase, neutral and earth should be
provided by the building’s electrical installation. the power supply circuit for this
equipment should be fitted with 16 A overcurrent protection and differential protection.
the modem should be connected to the mains via a readily accessible wall socket
ensuring the electric cutting.
Maintenance
It is prohibited to open the casing. This must be done only by qualified personnel appro
-
ved by your supplier.
do not use liquid or aerosol cleaning agents.
253156400-A_GIR 1201 V2 STD-gb.i15 15
14/10/2008 17:00:08
