Sage the Oracle Touch BES990, Быстрое руководство

Страница: 15 / 140

15
EN
Troubleshooting
PROBLEM POSSIBLE CAUSE WHAT TO DO
Grinder Motor starts
but no ground
coffee coming
from grind outlet
•
No coffee beans in
bean hopper.
• Grinder/bean hopper
is blocked.
•
Coffee bean may have
become stuck in hopper.
•
Fill bean hopper with fresh coffee beans.
• Remove bean hopper. Inspect bean hopper
& grinding burrs for blockage. Replace
parts and try again.
Grinder Motor starts
but operates with a
loud ‘clicking’ noise • Grinder is blocked
with foreign item or
chute is blocked.
• Moisture clogging grinder.
•
Remove bean hopper, inspect burrs
and remove any foreign body.
•
Clean the burrs and grind outlet,
see page 12.
• Leave burrs to dry thoroughly before
re-assembling. It is possible to use a hair
dryer to blow air into the burr area to
quicken the drying process.
Unable to lock bean
hopper into position
•
Coffee beans
obstructing bean
hopper locking device.
• Remove bean hopper.
Clear coffee beans from top of burrs.
Re-lock bean hopper into position.
Portafilter overfills
• Tamping fan was
removed for cleaning
and not replaced.
• Check that the tamping fan is in position
and mounted correctly to the drive shaft,
see Instruction Book on Sage website.
Grinder
Emergency stop? •
Rotate the portafilter to the left to stop
the auto grind, dose & tamp function.
• Unplug power cord from power outlet.
Grinder running
continuously
• No beans in hopper. • Fill hopper with beans.
•
Rotate the portafilter to the left to stop
the auto grind, dose & tamp function.
• Tamping fan has
been removed.
• Check that the tamping fan is in position
and mounted correctly to the drive shaft,
see Instruction Book on Sage website.