Sage the Dual Boiler BES920, Инструкция пользователя

Страница: 17 / 34

17
OPERATING YOUR NEW APPLIANCE
ADVANCED ESPRESSO FUNCTIONS
Press & Hold - 1 CUP
Press & hold 1 CUP to bypass the
pre-infusion phase and deliver water to
the group head at the full 9 bar pressure.
Release button to stop extraction. This
function can be used when purging the
group head.
Press & Hold - 2 CUP
Press & hold 2 CUP to bypass the
pre-infusion phase and deliver water to
the group head at the full 9 bar pressure.
Release button to stop extraction. This
function can be used when purging
the group head.
Press & Hold - MANUAL
Press & hold the MANUAL button to
deliver water to the group head at low
pre-infusion pressure. When MANUAL
button is released, water will continue at
the full 9 bars of pressure. Press MANUAL
button again to stop extraction.
This function can be used to manually
control the pre-infusion duration.
ACCESS ADVANCED MENU
To access the Advanced Menu:
With machine OFF, press and hold the
1 CUP button, then press the POWER
button.
POWER
POWER
TURN
POWER OFF
THEN PRESS
& HOLD
Resetting default settings
The machine has the following
default settings:
1.
Temperature – 93°C
2.
Pre-Infusion – Duration Pr07
3.
Pre-Infusion – Power PP60
4.
Steam temperature – 135°C
5.
Auto Start – OFF
6.
Audio – LO
7.
Water Hardness – 3
8.
Espresso Volume durations –
30/30 secs
To reset machine to original default settings,
first enter Advanced Menu. rSEt will be
displayed on the LCD. Press the MENU
button to reset the machine to the default
settings. The machine will beep 3 times
to confirm.
The machine will then prompt you to set the
water hardness. Select your water hardness
using the UP & DOWN arrows & press
MENU to confirm or press EXIT to return
to STANDBY mode.