Sage Smart Fryer BDF500, Информационная книга

Страница: 7 / 16

7
Assembly
STEP 1
Remove lid from the deep fryer by
grasping the handle on top and lift off.
STEP 2
The wire frying basket has a hinged handle
for compact storage. Remove the basket
from the deep fryer. Extend and lock the
basket handle into position by squeezing the
two handle prongs together, pull back and
lock behind the two wire supports extending
from edge of basket.
STEP 3
Lift the control panel with attached element
upwards and away from the deep fryer.
STEP 4
Remove the inner frying bowl by
grasping the rim and lifting upwards.
STEP 5
To reassemble the deep fryer, reverse
steps 1–4.
WARNING
When assembling your deep fryer for
use, please ensure the narrow tongues
in the control panel are inserted into the
corresponding grooves of the deep fryer
body. The deep fryer will not operate unless
correctly assembled.
BEFORE FIRST USE
Remove any promotional materials and
packaging materials before use. Wash the lid,
removable inner bowl, stainless steel outer
body and wire frying basket in hot soapy
water, rinse and dry thoroughly.
Wipe the element with a soft, damp cloth
and dry thoroughly. Reassemble and ensure
the bowl is completely free of water before
adding any oil.
1. Place the deep fryer on a dry, level
surface. Ensure the deep fryer is not too
close to the edge of the bench top, and
that the power cord or basket handle does
not extend over the edge.
2. Remove the frying basket from the
deep fryer and add oil to the bowl. Do not
add less than the minimum level mark
(2.5 litres) or exceed the maximum level
mark (4 litres).
IMPORTANT
NEVER exceed the maximum level mark with
oil (maximum is 4 litres). This product must
be filled with oil to the exact marked level.
The product will be severely damaged if
heated without oil in the frying bowl.
3. Replace the lid.
4. Plug in the power cord. Ensure cord is fully
extended. The deep fryer will beep once
for self checking, the display panel will
illuminate with white background light.
The deep fryer enters COOK mode.
5. To change temperature format, press and
hold the SCROLL/SELECT knob
for three seconds. If the temperature
format is set to Celsius, it will change to
Fahrenheit after pressing the SCROLL/
SELECT knob for three seconds. Change
the format one time per command. To
change the format again, release the
knob, and again press and hold the
SCROLL/SELECT knob for
three seconds.
NOTE
When the deep fryer is unplugged from the
power outlet and them plugged back in,
the cooking temperature format display will
default to the last selected format, Celsius
or Fahrenheit.
STAND BY MODE
When the deep fryer remains inactive for
10 minutes, it will enter stand by mode.
The white backlight will turn off and
STANDBY will display. The fryer will come out
of stand by mode by pushing any button or
turning the SCROLL/SELECT knob and then
is ready to start a cooking operation.