14
15
opERAtINg YoUR NEW AppLIANCE
ExtRACtINg ESpRESSo
Insert the Portafilter into the Group Head
& lock into position. Turn the Control Dial
to the ‘Espresso’ position. A pumping noise
will be heard. After a few seconds, coffee will
begin to brew into the cup.
When sufficient coffee has flowed into
the cup, turn the Control Dial to ‘Standby’.
This will stop the flow of coffee. Sage
recommends approx. 30 sec of extraction.
NotE
For optimal flavour when using a
1 CUP filter, you should extract approx.
30ml. When using a 2 CUP filter, you
should extract approx. 60ml.
LoW pRESSURE pRE-INFUSIoN
The low pressure pre-infusion gradually
increases water pressure to gently expand
grinds for an even extraction before
increasing to full pressure.
WARNING
The metal parts of the portafilter
will be very hot.
NotE
If machine is run continuously for
30 minutes, allow machine to cool for
5 minutes before each use.
AFtER ExtRACtINg ESpRESSo
Insert the Portafilter into the Group Head &
lock into position.
opERAtINg YoUR NEW AppLIANCE
tExtURINg MILK
the Duo temp™ pro is equipped with
a commercial style steam wand.
•
Before inserting the steam wand into
the milk, it is recommended to purge
the steam wand.
•
Set the Control Dial to the ‘Steam’
position.
•
The ‘Steam’ LED will illuminate.
•
It may take a few moments before the
steam appears.
•
Pause the steam by returning the dial
back to the ‘Standby’ position. This will
avoid the milk splashing out of the jug.
•
The Steam will Pause for 8 secs.
•
Insert the wand into the milk and set the
Control Dial to the ‘Steam’ position to
texture milk.
•
To stop the steam set the Control Dial
to the ‘Standby’ position and remove the
jug.
NotE
When the espresso machine creates
steam, a pumping noise can be heard.
This is the normal operation of the
15 bar Italian pump.
Hot WAtER
the machine features a separate Hot
Water function that dispenses hot water
from the Steam Wand.
to use the Hot Water function:
•
Press the ‘SELECT’ button and the
Hot Water LED will illuminate.
•
Turn the Control Dial to ‘Steam’.
to turn the hot water off, turn the Control
Dial to the ‘Standby’ position.
NotE
The machine will automatically default
to ‘Steam’ when the appliance is first
switched on.
Both Steam and Hot Water functions
cannot be operated at the same time.
AUto pURgE
For extracting espresso immediately after
using the steam function, this machine
features an auto-purge function.
The auto purge function ensures the
ground coffee will not be burnt by the initial
water flow from the thermocoil being too
hot. The water is automatically released
internally into the drip tray ensuring that
the thermocoil is at optimal temperature
for extracting espresso. Your espresso
will always be extracted at the optimal
temperature ensuring only the best flavours
are extracted.
