29
PROBLEM
POSSIBLE CAUSES
EASY SOLUTION
Coffee not hot enough.
Cups not pre-heated.
Rinse cups under hot water outlet
and place on cup warming tray.
Portafilter not pre-heated.
Rinse portafilter under hot water outlet.
Dry thoroughly.
Milk not hot enough
(if making a cappuccino
or latté etc).
Make sure sensor is in contact. Adjust
milk temperature setting on screen.
Water temperature needs
to be adjusted.
Increase the brew temperature
in 'Settings' menu.
No crema.
Coffee tamped too lightly.
Tamp betweens or 15–20kg of pressure.
Coffee is ground too coarsely.
Use slightly finer grind.
Refer to ‘Setting the Grind Size’, page 14
and ‘Under Extraction’, page 20.
Coffee beans or pre-ground coffee
are not fresh.
If grinding fresh whole coffee beans,
use freshly roasted coffee beans with
a ‘Roasted On’ date and consume
between 5–20 days after that date.
If using pre-ground coffee, use within
a week of grinding.
The filter basket may
be blocked.
Use the pin on the end of the provided
cleaning tool to unblock the hole(s).
If the hole(s) remain blocked, dissolve
a cleaning tablet in hot water and
soak filter basket and portafilter
in solution for approx. 20 minutes.
Rinse thoroughly.
Single Wall filter baskets are being
used with pre-ground coffee.
Ensure you use Dual Wall filter baskets
with pre-ground coffee.
Water leaking.
Auto purge feature. Immediately
after the espresso, hot water and
steam functions, the machine will
purge water into the drip tray. This
ensures the thermocoil is at the
optimal temperature.
Ensure the drip tray is firmly pushed
in place and emptied whenever the
Empty Me! indicator is displayed.
Water tank is not fully inserted and
locked into position.
Push water tank down completely
to lock into place.
The silicone seal surrounding the
shower screen needs to be replaced
to ensure the portafiler is properly
secured into the
group head.
Refer to ‘Replacing the Silicone Seal’,
page 26.
Содержание Barista Touch SES880
Страница 1: ...the Barista Touch Instruction Book SES880...
