Sage Barista Touch SES880, Инструкция

Страница: 17 / 31

17
HOT WATER
The HOT WATER function can be used
to pre-heat cups or add hot water manually.
To start & stop hot water, touch 'Hot Water'
on the screen.
Hot water limit is approximately 90 seconds.
Depending on the size of your cup, you may
need to touch the 'Hot Water' button
to stop pouring.
NOTE
You cannot run hot water and extract espresso
at the same time.
ADDING NEW DRINK
Touch 'Add New' in the menu screen to create
a customised drink. You can adjust parameters
based on a standard style and save your own.
Add New
+
Alternatively, after manually adjusting
parameters touch the small icon to save
the current setting.
TIPS
Ensure the drip tray is firmly pushed in
place and emptied whenever the Empty Me!
indicator is displayed.
AUTO OFF MODE
The machine automatically switches to
AUTO OFF mode after 30 minutes.
SETTINGS
To enter settings menu, touch the icon
on the upper right of the screen.
Quick Start Guide
Machine will guide you on screen, step by step
to make an actual coffee.
Clean Cycle
The Cleaning Cycle cleans the shower screen
and back-flushes the group head.
Cleaning Steam Wand
This will show how to clean the steam wand
to remove any blockage for better steaming
performance.
Descale Cycle
Descaling prevents excess mineral and scale
build-up. A pop-up message will let you know
when it is time for descaling.
Brew Temperature
It allows you to adjust the recommended
extraction temperature.
Default Milk Temperature
It allows you to adjust default temperature level
on all milk base drinks.
Water Hardness
It is to test water to set how often you need
to descale the machine.
Screen Brightness
You can adjust brightness of your touch screen.
Sound Volume
You can adjust volume for alerts and reminders.
Demo Mode
It is for on-screen Barista Touch™
demonstration sequence.
Factory Reset
Use this function to reset all programmable
values back to the factory settings and delete
all custom drinks.