Sage Barista Express BES875, Быстрое руководство

Страница: 18 / 44

18
PROBLEM POSSIBLE CAUSE WHAT TO DO
Machine does
not heat up.
STEAM/HOT
WATER light
flashes when
the machine
is turned on.
• STEAM / HOT WATER dial is not in
the STANDBY position.
• Turn the STEAM / HOT WATER dial to the STANDBY
position. Machine will commence heating.
Water does
not flow
from the
group head.
No hot water.
• Machine has not reached operating
temperature.
• Allow time for the machine to reach operating
temperature. The POWER button light will stop flashing
and all button lights on the control panel
will illuminate when ready.
• Water tank is empty. • Fill tank.
• Water tank is not fully inserted
and locked into position.
• Push water tank down completely to lock into place.
• Machine needs to be descaled. • Refer to ‘Descaling’, page 14.
• Coffee is ground too finely and/or
too much coffee in filter basket and/
or over tamping and/or filter basket
is blocked.
• See below, ‘Espresso only drips from the portafilter
spouts or not at all’.
Espresso only
drips from
the portafilter
spouts or
not at all.
• Coffee is ground too finely. • Use slightly coarser grind. Refer to ‘Setting the
Grind Size’, page 9 and ‘Over Extraction’, page 11.
• Too much coffee in the filter basket. • Lower dose of coffee. Refer to ‘Setting the Grind
Amount’, page 9 and ‘Over Extraction’, page 11.
• Coffee tamped too firmly. • Tamp between 15–20kg of pressure.
• Water tank is empty. • Fill tank.
• Water tank is not fully inserted and
locked into position.
• Push water tank down completely to lock into place.
• The filter basket may be blocked. • Use the pin on the end of the provided cleaning tool
to unblock the hole(s). If the hole(s) remain blocked,
dissolve a cleaning tablet in hot water and soak filter
basket and portafilter in solution for approx.
20 minutes. Rinse thoroughly.
• Machine needs to be descaled. • Refer to ‘Descaling’, page 14.
Espresso
runs out too
quickly.
• Coffee is ground too coarsely. • Use slightly finer grind. Refer to ‘Setting the Grind Size’,
page 9 and ‘Under Extraction’, page 11.
• Not enough coffee in the filter
basket.
• Increase dose of coffee. Refer to ‘Setting the Grind
Amount’, page 9 and ‘Under Extraction’, page 11.
• Coffee tamped too lightly. • Tamp between 15–20kg of pressure.
Troubleshooting