PAGE HEADER.....
16
CARE & CLEANING
• If any of the holes in the tip of the steam
wand become blocked, it may reduce frothing
performance. Manually purge the steam wand
to try and clear the holes.
• If the steam wand remains blocked, unscrew
the steam wand tip and use the cleaning
tool to unblock the holes; cleaning tool is
located in the back of the machine, under the
water tank.
1
5
3
4
2
6
!
• Rinse the steam tip and wipe with a clean,
dry cloth. Reassemble the steam wand by
screwing the steam tip back on to the steam
wand. Purge the steam wand after cleaning.
1
5
3
4
2
6
!
CLEANING THE FILTER BASKETS
AND PORTAFILTER
• The filter baskets and portafilter should be
rinsed under hot water directly after use to
remove all residual coffee oils.
• If the holes in the filter baskets become
blocked, use the steam wand cleaning tool
to unblock the holes.
CLEANING THE SHOWER SCREEN
• The group head interior and shower screen
should be wiped with a damp cloth to remove
any ground coffee particles.
• Periodically run hot water through the
machine with the filter basket and portafilter
in place, without any ground coffee, to rinse
out any residual coffee.
CLEANING THE DRIP TRAY
• The drip tray should be removed, emptied
and cleaned after each use or when the drip
tray indicator rises through the drip tray grid.
• Remove the drip tray grid and wash both
parts in warm soapy water.
• Cleaning the Outer Housing
• Wipe the outer housing with a soft, damp cloth
and then polish with a soft, dry cloth.
NOTE
Do not use any abrasive cleaners, pads or
cloths which can scratch the surfaces of
the machine.
NOTE
Do not clean any of the parts or
accessories in the dishwasher.
WARNING
Do not immerse the power cord,
power plug or machine in water
or any other liquid.
STORING YOUR MACHINE
Before storing, turn the machine off, switch
off and remove the power plug from the power
outlet. Empty the water tank and drip tray and
ensure the machine is cool, clean and dry. Store
in an upright position.
Do not place anything on top of machine.
RESET FACTORY ESPRESSO VOLUME
SETTINGS
1. Turn the machine off, by pressing the 1 CUP
and STEAM buttons simultaneously for
5 seconds.
2. Press and hold the 1 CUP and 2 CUP buttons
for 5 seconds. Buttons will illuminate.
3. Press the 1 CUP or 2 CUP buttons and the
light will flash 3 times to indicate that all
volumes have been reset.
4. Machine will then return to ready mode.
NOTE
Press any other button to exit factory reset
mode.
