Sage Science BluePippin Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 92

Sage Science BluePippin Скачать руководство пользователя страница 56

978-922-1832

●

www.sagescience.com

●

[email protected]

BluePippin Operations Manual 460013 Rev F

16-1

16

System Options Tab

The default screen on the BluePippin is a tabbed format. The System Options is the fifth
tab.

Overview

The System Options Tab allows users to set or change global configurations for the
software and BluePippin.

This screen allows users to set the following:

•

Instrument name

: A name can be given to (or changed for) the instrument that will

be displayed in the Main Tab and in the log files. The default name is the
instrument serial number

•

UDP Server Port:

Provides an address for remote communications between the

BluePippin and wireless control. Contact Sage Science for support.

•

Reversible Field for Sample Recovery:

When activated, all sample collections

will terminate with a 5 second field reversal to improve recovery.  When
deactivated, all sample collections will not include the field reversal.  The default
setting is ON.   When activated, the current will be reversed on all subsequent runs
until the user changes the setting through the System Options tab.

•

Date/Time:

This allows users to set or change the date and time settings for the

instrument. The date and time settings are recorded in log files and log file names.

System
Options
Tab

Instrument
Name

Reversible
Field

UDP Port

Date and
Time

«
...
54
55
56
57
58
...
»

Содержание BluePippin





























































































Отзывы:

Нет отзывов