Ver. 2.0
SAGA
DATA DISPLAY OF HOTEL SAFE
NORMAL DATA DISPLAY
Again
:
indicates that you need to key in the previously entered digits a second time
.
BA-HI
:
indicates that the batteries are normal.
BA-LO
:
indicates that the batteries are low
.
Test battery energy
When the door is closed,press the locking key “#”,and the battery energy test procedure will start.If the display
reads “BA-HI”,it means the batteries are normal;if the display reads “BA-LO”,it means the batteries are low and
must be replaced as soon as possible.
CLOSE
:
indicates that the locking bolts are extending automatically.
DONE
:
indicates that you have successfully completed the operation.
NEW
:
indicates that you need to key in new digits right now.
OPEN
:
indicates the locking bolts are retracing.
OPENED
:
indicates the locking bolts have been retracted and you may open the door.
ERROR DATA DISPLAY
when the following data appear on the display,it means an opeation error has occurred and you will need to
operate per the following instructions
:
HOLD15
:
This data appear on the display after you have enter the incorrect code for four times in a succession.It
means the electronic code system is now locked out and that you will not be able to operate the keys
until the system unlocks itself in 15 minutes.
ERROR1
:
This data means the door fails to open as the bolts get stuck,In this case,give a push to the door to set
free the bolts before you perform the opening operation.
ERROR2
:
This data indicates the bolts stud is being held (the door may be left unlatched) and locking bolts fail to
extend.In this case,give a push to the door until it firmly fit into place before you proceed with closing
operation.
