Ver. 7.0
Program Mode
Second Screen
The digitals on the position 1,2,3,4 express the setup of motor rotation time and expansibility in the
future. They are meant for producer and must not be changed.Please press 0,2,2 ,0 to overleap it.
(5) MASTER CODE
Press 0
- Master code & master card are not in use
Default Parameter
Press 1
- Master code is in use only
Press 2
- USE master card only
Press 3
- Master code and master card together
Press 4
- Either master code or master card
HOW TO RESET THE MASTER CODE
Import Tips :
1.
You only can set up the master only when you select function number “
1
”,namely is that
master is in use.
2.
The back-up master code for the product on delivery from manufacturer is
“
000000
”.
The
master code must to be programmed by
6
digits!
Please don’t set master code as
751019
,770626, 910157.
Door position:
OPEN
1
.
Press
“
＊＊
”
,the screen will show “
PROG
”, then enter the
back-up master code
and the
LED display will show
“
NEW
”.
2.
Please Key in the
any combination of 6 digits
that your desire in 5 seconds after “
NEW
”
disappeared.
3.
The LED display will show
“
AGAIN
”
, then enter again the new master code in 5 seconds after
“
Again
”
disappeared.
4.
The LED display show
“
DONE
”,
the new master code is set up successfully.
HOW TO RESET THE MASTER CARD
To reset the master code, you need first switch off the safe power and switch on after 3
seconds
1.
Press
＊＊
,the screen will show
“
PROG
”,
then enter
“
910157
”
and the LED display
will show
“
NEW
”
2.Place the card flat against the slot
(magnetic strip down)
and pass the card from
right to left through the slot quickly and in even speed ,the display will subsequently
read
“
GOOD
”.
3.Please input the right master code after
“
GOOD
”
disappear,the display will
subsequently read
“
DONE
”,
it means that you have set up the master card
successfully.
Please note you can set up the master card when it is in use ,namely is the second
screen 5
th
position have been selected digital 2,3 and 4.
SAGA
