9
Multiple Product Control
Each product can be paired with its own remote or multiple products can be paired in a single remote. Please
note a maximum of six individual products (either M500 or M1000) can be connected to a single Bluetooth
remote control. This will allow for control of all products at once with a single remote control. Additionally, the
software of the product has been designed in such a way that when multiple products are connected to a main
switch, products can be manually switched off and when switched back on they will operate in the same state as
before they were switched off.
Multiple Product Installation
Follow steps 1-4
‘
Installing the Product into Surround/Enclosure
’
to fit the first product. It is important that the
first product is orientated so that the side of the product with the slots is left free and not connected to first end
of the installation (Fig. 18).
1.
When the first product is installed and securely fixed, prepare the second product by unscrewing the
joining screws (Fig. 19A) and screwing them into the opposite side of the metalwork (Fig. 19B). Please
note, these screws should not be fully tightened and 5-10 mm of thread should be left protruding from
the edge of the product.
