Safran 4G V-Flex, Быстрый старт

Страница: 24 / 37

QUICK START GUIDE 23
S
T
E
P
T
H
R
E
E
:
C
O
M
M
U
N
IC
A
T
IO
N
RS-232
For RS-232 installations, a female DB9 connector should be used
on the cable.
Connect RS232_TX (Violet wire – Pin 4 of 28)
to the DB9F Pin 2.
Connect RS232_RX (Violet/White wire – Pin 2 of 28)
to the DB9F Pin 3.
Connect the Signal Ground (Black/Red wire – Pin 6 of 28)
to the DB9F Pin 5.
IMPORTANT: Only one device can be installed in an RS-232 configuration and the maximum cable
length is 150 ft. (45m). If the maximum cable length is used, the initial baud-rate must be set to 9600 Bd.
If a shorter cable is used, you may try setting a higher baud-rate.
RS-232
from the
Com Port