Safety POWELL PowlVac-ND Скачать руководство пользователя

Страница: 3 / 63

Powered by Safety

01.4IB.77000B

Powered by Safety

Signal Words

As stated in ANSI Z535.4-2007, the signal word is

a word that calls attention to the safety sign and

designates a degree or level of hazard seriousness.

The signal words for product safety signs are

“Danger”

“Warning”

, and

“Caution”

. These

words are defined as:

DANGER indicates an imminently hazardous

situation which, if not avoided, will result in

death or serious injury.

DANGER

WARNING

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injury.

CAUTION

CAUTION, used with the safety alert symbol,

indicates a hazardous situation which, if not

avoided, could result in minor or moderate

injury.

CAUTION, used without the safety alert

symbol, is used to address practices not

related to personal injury.

CAUTION

NOTICE

NOTICE is used to address practices not related

to personal injury.

Qualified Person

For the purposes of this manual, a qualified

person, as stated in NFPA 70E®, is one who has

skills and knowledge related to the construction

and operation of the electrical equipment and

installations and has received safety training to

recognize and avoid the hazards involved. In

addition to the above qualifications, one must also

be:

1. trained and authorized to energize,

deenergize, clear, ground, and tag circuits

and equipment in accordance with

established safety practices.

2. trained in the proper care and use of

personal protective equipment (PPE)

such as rubber gloves, hard hat, safety

glasses or face shields, flash clothing, etc.,

in accordance with established safety

practices.

3. trained in rendering first aid if necessary.

Содержание POWELL PowlVac-ND
































































Результаты поиска

Содержание POWELL PowlVac-ND

Отзывы:

Похожие инструкции для POWELL PowlVac-ND

Бренды по названию

Популярные бренды

Safety POWELL PowlVac-ND, Руководство пользователя

Результаты поиска

Содержание POWELL PowlVac-ND

Отзывы:

Похожие инструкции для POWELL PowlVac-ND

Бренды по названию

Популярные бренды