40
OBSERVER 4100 USER GUIDE
Acceleration
The Acceleration menu controls the thresholds of
the Observer 4100’s accelerometers that trigger
an overshock (SHK) event. 3 Axis (SV-4CSDIS)
and 6 Axis (41-6AXIS-ACC) accelerometers are
available.
Use the remote control to configure the following
options:
EN:
Select
ON
to enable the SHK event. Select
OFF
to disable it.
THRESHOLD:
Use the number keys on the
remote control to enter the amount of force (in
Gs) for each axis (
X
,
Y
, and
Z
) at which the event is
triggered.
ALARM:
Select
ON
to enable the ALM LED on the
front of the Observer 4100 when the THRESHOLD
force is reached and an event is triggered. This
LED continues to flash after an event is triggered
until the configuration menus are accessed.
LOCK:
Select
ON
to lock the video of the event
recorded when the THRESHOLD force is reached
(not allowing it to be overwritten).
For more information about
connecting the Observer 4100 to to
an accelerometer unit, please contact
Safety Vision Technical Support.
Содержание OBSERVER 4100
Страница 1: ...OBSERVER 4100 USER GUIDE...
Страница 10: ...8 OBSERVER 4100 USER GUIDE CP3 Monitor CP4 Monitor...
Страница 52: ...50 OBSERVER 4100 USER GUIDE...
Страница 61: ...OBSERVER 4100 USER GUIDE 59...
