OBSERVER 4100 USER GUIDE
39
Speed
The Speed menu controls the speed type (SPDL
and SPDO) events.
Use the remote control to configure the following
options:
SPEED SOURCE:
Select
VEHICLE
to obtain vehicle
speed data from the vehicle’s own speedometer,
or
GPS
to obtain this data from the GPS signal.
SPEED UNIT:
Select
MPH
to use miles per hour or
KPH
to use kilometers per hour.
ALARM SETTING:
Select the following options for
LOWSPEED
and
OVERSPEED
:
ENABLE:
Select
ON
to enable this SPEED event.
Select
OFF
to disable it.
THRESHOLD:
Use the number keys on the remote
control to enter the speed at which the event is
triggered.
ALARM:
Select
ON
to enable the ALM LED on the
front of the Observer 4100 when the THRESHOLD
speed is reached and an event is triggered. This
LED continues to flash after an event is triggered
until the configuration menus are accessed.
LOCK:
Select
ON
to lock the video of the recorded
event when the THRESHOLD speed is reached (not
allowing it to be overwritten).
For more information about
connecting the Observer 4100 to a
vehicle speedometer, please contact
Safety Vision Technical Support.
Содержание OBSERVER 4100
Страница 1: ...OBSERVER 4100 USER GUIDE...
Страница 10: ...8 OBSERVER 4100 USER GUIDE CP3 Monitor CP4 Monitor...
Страница 52: ...50 OBSERVER 4100 USER GUIDE...
Страница 61: ...OBSERVER 4100 USER GUIDE 59...
