Safety Vision 48 Series, Руководство пользователя

Страница: 15 / 24

48 SERIES IP CAMERA 13
1. Feed the camera network cable through the lock nut, waterproof rubber
gasket (the rubber gasket inset ridge must face the waterproof endcap),
and the waterproof endcap in order.
2.
Crimp an RJ-45 network plug onto the end of the cable, taking care to
insert the twisted pairs of wires in correct order.
3.
Place the O-type gasket onto the end of the camera’s network interface
socket.
4.
Insert the network plug into the camera’s network interface
socket.
5.
Insert the waterproof rubber gasket into the waterproof endcap, and
secure the lock nut with the waterproof endcap.
6.
Align the snap on the waterproof endcap with the notch on the camera’s
network interface socket, and then secure the waterproof endcap to the
camera’s network interface socket to finish the installation.