Safety Vision 48 Series, Руководство пользователя

Страница: 11 / 24

48 SERIES IP CAMERA 9
8. Configure 48 series camera.
Using a laptop, access the camera’s live view as described in the
Configuration section.
9. Adjust camera angle and field of view.
Use a small Phillips head screwdriver (pan rotation) and a T15 TORX (tilt
rotation) to loosen the screws on the camera gimbal to adjust the camera
angle to the desired field of view. Once completed, tighten the screws in
place.
10. Secure camera dome cover.
Using a T15 TORX™, tighten the 4 locking screws securely to the camera
base to ensure the camera is waterproof.
WARNING:
Do not over tighten the camera housing torque screws because
they can be stripped or broken.
Connecting the Camera Cables
1.
Connect corresponding power, audio cable to external cable. Use
insulated tape to wrap the connection and make it waterproof.
2.
Connect alarm input and output terminal to external cable according to
Connect Alarm Input/Output Port. Use insulated tape to wrap connection
to make it waterproof.
3. Connect network cable to corresponding network port of the device
cable according to
Network Cable Waterproof Jacket (Optional) .