Step 5:
Run camera cables with supplied 5 meter
extension cables. Ensure proper connection, use
electrical tape if needed.
V - Video Output
A - Audio Output
1.
Camera 1 Video Input
2.
Camera 2 Video Input
3.
Camera 3 Video Input
4.
Camera 4 Video Input
Step 6:
BEFORE YOU MAKE CONNECTIONS,
REMOVE FUSES FROM RUBBERIZED
COMPARTMENTS ON THE RED AND
WHITE WIRES.
RED: 12V Constant Power
WHITE: Ignition Signal
BLACK: Ground
Run the power cable to a power source.
Typically the ignition harness under the
driver side steering wheel. Test and make sure
you have a constant power source and a proper
ignition source.
Make the connection.
Once the connection is made you may
replace the supplied Fuses in the rubberized
compartments on the red and white wires.
4
