1
This is a step by step guide that will walk you through installing the UCIT
PRO-4 Channel Camera System. Basic wiring experience and knowledge
is required at the minimum.
Please follow each step
, otherwise your
system may not work properly. If you have any questions regarding the
installation of this system contact Support at
815
-
725
-
4400
or
Support@
DriverLocate
.
com.
We are always available for questions when
needed. Please take your time, take caution and Enjoy!
Tools Required:
•
Power Drill
•
Volt Meter
•
Wire Crimpers
•
Wire Strippers
•
Electrical Tape
•
Zip Ties
•
Wire Connectors (Installer’s
Choice ex.T-tap, ring connector,
fuse taps)
•
Extra wire (Shouldn’t need but
just in case)
•
Screwdrivers (flat head and
philips)
•
Self Tapping Screws
What’s In The Box:
•
DVR
•
Camera(s) (individually boxed
with mounting hardware)
•
Camera Cable(s)
•
GPS Antenna
•
Comm Antenna
•
Microphone and Extension Wire
