Safety first Total Safety Solutions EMERGENCY-PLUG, Руководство пользователя

Страница: 33 / 40

30
7.2 Connecting
4
Make sure you use the correct plug type when connecting the Emergency-plug. Refer to
Chapter 2.2 Plug Types for further information.
Connect the Emergency-plug as follows:
1. Open the vehicle’s charge port door.
2. Press the Emergency-plug power button.
The Emergency-plug starts the self-test function. Refer to Chapter 6.2. Use the self-test function
for more information.
3. Insert the Emergency-plug into the vehicle charging port. Press the Emergency-plug in firmly.
The LED indicator first flashes yellow and then lights up blue.
4
The LED indicator should light up blue within a maximum of 5 seconds. If the LED indicator
reacts differently, refer to Chapter 2.3. LED indicator colour coding.
4
Check which type of charging connection should be used. Refer to Chapter 2.2 Plug Types
for further information.
4
The vehicle may give an error message when the Emergency-plug is connected. This error
message is caused because the vehicle does not receive power through the charging port.
This does not affect the proper functioning of the Emergency-plug. The error message
disappears automatically when the Emergency-plug is disconnected and the vehicle is
switched on again via the power button.