PRODUCT MANUAL
Platinum Nano Voice Recorder : SB-VR9920
Page 7
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
RECORD QUALITY
The Platinum Nano has to record quality modes: 192kbps and 384kbps
Keep in mind that the higher the record quality the less recording time you will get with regards to
memory. In this case this unit has 8Gb of memory space.
1. At 384 kbps - You will get approximately 48 hours of memory recording time before memory
gets full, but quality level is crisper.
2. At 92 kbps you will get about 72 hours of memory time
NOTE: Battery time is not affected by this. Just the memory space. So you will still look to get
about 40 hour of non stop recording before you will have to recharge unit, and the same almost
200hrs of standby time.
CHANGING RECORDING QUALITY:
1. From the default screen, press PREV or NEXt to get to SETTING MODE
2. Press MODE tp select
Highlight REC SET and press MODE to select
3. Highlight RECORD TYPE and press MODE to select
4. Use PREV or NEXT button to select your preferred record quality (192 or 384) then press
MODE to select
5. You are done
6. EXIT by pressing and holding the MODE button to return to SETTING MODE main screen.
IMPORTANT NOTE:
This unit will turn off if idle for a minute. To turn unit on again, press and hold the PLAY button. Do
not use the system power switch each time. Turning system power switch will delete all your custom
settings.