Place Car Seat
Forward-Facing in
Back Seat
continued on next page
48
Forward-Facing
UAS + Tether Install
47
Do not use the UAS anchors of the child restraint anchorage
system (UAS) to attach this child restraint when restraining
a child weighing more than 18 kg (40 lbs).
Before you begin installing the seat
into your vehicle, did you check:
Your child’s weight and height?
10-18 kg
(22-40 lb)
and
74-125 cm
(29-49 in.)
Your child’s fi t? See page 10.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
Route the Connector with
the Adjuster Closest to it
Through the Forward-
Facing Belt Path As Shown
Pull it across the seat. Then
thread it through the other
belt path opening.
Do not twist belt.
1
2
3
4
5
Remove UAS Belt from
Storage Location
Remove it from the rear-facing
belt path so both connectors
are on the same side of the
seat.
Finished UAS Belt Routing
Remove Anti-Rebound
Bar
You
must
remove the anti-
rebound bar to use this seat
in
Forward-Facing
Mode.
See pages 21-22.
Adjuster
Adjuster
