WARNINGS:
Do not use LATCH along with the vehicle
lap or lap/shoulder belt.
Store LATCH when using vehicle belts.
Store tether hook when used rear facing.
Check vehicle belt before each use. Use
only if belt can be tightened properly
and securely.
Failure to follow these warnings can
result in serious injury or death.
Vehicle Belt Installation
38
To Release LATCH
Remove child from child restraint.
Remove tension from LATCH belt
by pushing down on side of child
restraint with LATCH adjuster. Then
press adjuster button to loosen belt.
Unhook LATCH from bar by
squeezing spring lever, pushing hook
back into the seat bight and twisting.
Then pull it out of the vehicle seat.
Store LATCH when not in use. See
page 28.
37
continued on next page
Safety Tips:
Make sure harness and buckle fit your child correctly before
installing the child restraint. See pages 3-5.
Experts agree that children should remain rear facing as long
as possible. In this child restraint, your child can remain rear
facing up to 40 lb (18 kg) and up to 40 in. (101.6 cm).
1.
Fully Recline the Child
Restraint
Pull out on recline handle and push
top of child restraint back.
4358-6653 Grow and Go 3 in 1.indd 43-44
4358-6653 Grow and Go 3 in 1.indd 43-44
4/15/15 8:48 AM
4/15/15 8:48 AM