
Route the Lap Belt Only in
front of the Armrest as
shown
2.
Thread Both Lap and
Shoulder Belt through both
Vehicle Belt Attachment
Loops
3.
Thread Lap or Lap and
Shoulder Belt in front of 2nd
Armrest
Buckle the vehicle belt.
4.
Locate Locking Clip
location
Grasp both vehicle belts
together just behind the latch
plate and unbuckle.
NOTE:
If the latch plate ends
up just at the belt path
opening, grasp the belts on
the opposite side of the child
restraint, as close to the latch
plate as possible.
6.
Attach Locking Clip
Thread both portions of the
vehicle belt onto the locking
clip, as close to the latch plate
as possible.
7.
Position Locking Clip
Position locking clip about 1
in. (2.5 cm) from vehicle belt’s
latch plate.
8.
D
.G
ener
al V
ehicle
Installa
tion
Tighten Vehicle Belt
Push down firmly on the child
restraint and while pulling on
the shoulder belt to tighten.
Feed the shoulder belt back
into the retractor.
5.
28
27
continued on next page.
4358-4856 Go Booster 8/31/09 12:02 PM Page 29