49
50
F-3
Preparing to Install
Lower Anchor
Forward-Facing
Routing Lower Anchor
Belt
Insert the hook that has
the adjuster closest to
it, through the
forward-facing belt path.
1.
Thread Lower Anchor
Belt Across
Pull the lower anchor
hook across the back
and out the other side as
shown. Do not twist the
belt.
2.
F. Installing Forward-Facing
F-4
Install Forward-Facing
With Lower Anchor
Note:
Review your vehicle’s owner manual for lower anchor belt
use.
1.
Do not use the lower anchor belt along with the vehicle lap
or lap/shoulder belt.
Check the lower anchor belt before each use. Use only if
the belt can be tightened properly and securely.
Do not fasten multiple lower anchor hooks on the same
lower anchor bar in the vehicle.
Failure to follow these warnings can result in serious injury
or death.
continued on next page.
NOTE:
Pull the lower anchor belt out of the rear-facing belt path
if you have used this child restraint rear-facing.
Place Child Restraint
in the Back Seat
Forward-Facing
Place child restraint
flush
against the vehicle seat
back
forward-facing
.
Only use the recline
position to install the child
restraint flush against the
back of the vehicle seat.
Hook Lower Anchor
Hooks to Vehicle
Anchors
Fasten one lower anchor
hooks to the anchor in the
vehicle seat bight. Repeat
for other side of child
restraint.
3.
Do not use the lower anchors of the child restraint anchor-
age system (LATCH system) to attach this child restraint
when restraining a child weighing more than 40 lbs (18 kg).
The vehicle belt must be used for installation if your child
weighs more than 40 lb (18 kg).
Loosely Attach Tether
Hook to Vehicle’s Anchor
Check vehicle owner’s
manual for specific location.
2.
