45
46
E. Installing Rear-Facing
It maybe easier to tighten
the belt through the belt
path opening as shown.
8.
Check Belt Tightness
Grasp the child restraint
at the belt path with one
hand. Push and pull the
child restraint from side
to side, forward and back.
The child restraint should
not move more than 1 inch
(2.5 cm).
NOTE:
If it moves more
than an 1 inch (2.5 cm), try
reinstalling the child restraint
or try another seating
location.
Secure your child in the
child restraint. Recheck
the recline angle to make
sure it is reclined according
to your child’s weight.
Repeat steps if not reclined
correctly.
Thread Vehicle Belt
Thread the vehicle lap or lap/
shoulder belt combination
through the rear-facing belt
path.
5.
Pull Latch Plate Across
to Opposite Side
Reach under pad and pull
the vehicle belt across
the shell. Vehicle belt
MUST
be under pad and in front of
buckle strap.
Do not place vehicle belt
over child’s legs.
NOTE:
You must use the
1st or 2nd buckle strap slots
when rear-facing.
6.
1
2
Tighten Vehicle Belt
Push down firmly on the
child restraint and pull on
the shoulder belt to tighten.
7.
