Rotate the child restraint
over to locate buckle’s
metal retainer under the
shell where the drawer is.
6.
Rotate metal retainer, then
insert retainer up through
the shell and pad.
7.
From the front of the child
restraint, pull buckle free
from plastic shell and pad.
Store the buckle in the
storage drawer.
8.
C-6
Removing Bottom Seat Pad for Cleaning
You must remove the harness and buckle from the
seat bottom to remove the bottom pad off the plastic
shell. See section C-5.
Pull Bottom Seat Pad
from Backrest Pad
Undo the fastening strips
that hold the bottom seat
pad to the backrest pad.
1.
DO NOT remove the headrest pad or backrest
pad. These are not removable. Spot clean with
warm sudsy water.
Pull Bottom Seat Pad
from Front of Child
Restraint
Pull the pad out from
between the shell just
below the harness
adjustment lever. Remove
pad.
2.
Cleaning Bottom Seat Pad
Hand wash pad with warm sudsy water, rinse clean and air
dry. Spot clean the harness straps and remaining seat pads.
Do not use bleach or use other harsh cleaners. Do not dry
clean.
C. Basic Use
continued on next page.
To Store Harness System
Move the headrest to the
highest position. Push the
chest clip, buckle tongue
and metal retainers through
the harness slot in the
headrest. Slide these items
into the pocket between the
headrest pad and headrest
shell. Make sure the
components are flattened
Repeat for other harness
strap.
5.
23
22
4358-5626A Rumi S1 Inst.indd 25-26
4358-5626A Rumi S1 Inst.indd 25-26
2/23/12 2:46 PM
2/23/12 2:46 PM
