manualshive.com logo in svg

Safety 1st Advance SE 65 air+, Инструкция по эксплуатации

Поделиться
Скачать
Safety 1st Advance SE 65 air+ Скачать руководство пользователя страница 17

Attach Harness Straps to 
Splitter Plate 

From the back of the child 
restraint, fit the harness 
strap loops onto the splitter 
plate. 

The sewn end of the 

harness strap loops MUST face towards you. DO NOT 
twist harness straps or harness tightening strap and 
make sure the harness straps are COMPLETELY ON the 
splitter plate.

Harness system must be reattached 
correctly.

Failure to follow these steps can result in 
serious injury or death.

Pull up on buckle to make 
sure it is secured. 

The buckle must not pull 
out.

b.

 

Failure to place buckle’s metal retainer 
completely through pad and shell can result in 
serious injury or death. 

Thread Harness Straps

The sewn end of the 
harness strap loops MUST 
face towards you. 

(1) 

Thread left harness strap 

through the

 

back

 of the left 

buckle tongue. Repeat for 
right harness strap. 

(2)

 Thread the chest clip from 

front to back as shown.

(3)

 Push harness ends 

through upper harness slots 
at the same height.

DO NOT twist harness 
straps.

6.

 

C. Basic Use

30

29

 C-8 

Accessories On Select Models

Body Pillow

To remove the pillow, 
recline the child restraint 
and rotate the buckle’s 
metal retainer up through 
the shell, pad and pillow.  
Remove pillow. Replace 
the buckle.  Pull up on the 
buckle to make sure it 
cannot be pulled out. 

3

2     

2     

1

7.

 

Содержание Advance SE 65 air+





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды