manualshive.com logo in svg

Safety 1st Advance SE 65 air+, Инструкция по эксплуатации

Поделиться
Скачать
Safety 1st Advance SE 65 air+ Скачать руководство пользователя страница 13

Remove Harness 
Straps from Splitter 
Plate 

Fully loosen harness 
straps. Locate splitter 
plate on the back of 
the child restraint and 
unfasten the harness 
straps.

1.

 

 C-6 

Removing Seat Pad for Cleaning

Remove Harness 
Strap 

(1) 

Pull harness strap 

through the slots from 
the front.  

(2) 

Unthread harness 

strap from the chest clip.

(3) 

Do not unbuckle 

the buckle. 

Unthread 

harness strap from the 
buckle tongues.

2.

 

Remove Buckle 

Fully recline the child 
restraint and locate the 
buckle’s metal retainer.

3.

 

22

continued on next page.

 C-5 

Reclining Child Restraint

This child restraint has 4 
recline positions:

Rear Facing -

 

For children 5-22 lbs (2.3-
10 kg),

 recline so that the 

bottom most recline level to 
ground line is level to the 
ground when installed.  

For children 22-40 lbs 
(10.1- 18 kg),

 rotate the 

restraint so the recline 
angle is between the 2 level 
to ground lines.  Review 
installation sections.

Forward Facing - 

 

Use 

4

 

upright position.

 

To Recline 

From the back, pull out 
on handle to correct angle 
position. 

2

3

1

4

21

C. Basic Use

1

2

3

Содержание Advance SE 65 air+





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды