8
4.1 Testing AUX-channles with home automation systems
1. Make a factory reset for the sensor
unit: while pressing and holding
the adjustment mode button
❼
,
press first the OK-button
❷
and
then the child proof lock button
❶
. After a couple of seconds, the
indicator light panels
❽
should lit
purple.
2. While the indicator light panels
❽
are lit purple, test the AUX-chan-
nels:
• To activate AUX1 (alarm), press and hold the child proof lock button
❶
• To activate AUX2 (cooking on), press and hold the OK-button
❷
3. When you have finished testing, press the adjustment mode button
❼
and pair
the sensor unit again with the PCU normally according to the installation manual.
5. Removing the Connection Hub or CTU
from a Safera System
Connection Hub and CTU cannot be removed by normal means. The system’s oper-
ating principle is that once they are installed, their removal will always raise an error
event. In a special case where removal is necessary, contact local Safera Support for
instructions.
8
9
1
3
7
2
4
5 6
