Globalis International
PR9 SERVICE MANUAL-VER1.1 Page 60 of 112
automatically ejected after printing,
Entering the debug/test, LCD shows:
Press STOP
▉
key to accept it, LCD shows:
If you want to backup all received codes under the normal operation,
Press STOP
▉
key to accept it , LCD shows :
During the normal operation, LCD shows the current interface and
emulation; After the normal transaction having been treated, if you want to
print backup data, entering off-line mode again, select “PRINTING SAVED
DATA “, LCD shows :
Press STOP
▉
key to accept it, LCD shows:
After inserting the paper, the printer will print the data saved in RAM in HEX
format, during the process, LCD show:
If the sheet is not long enough, it will be eject automatically.
If printing finished, the sheet will be ejected automatically:
Now the printer will enter “Data backup” automatically
It can start new data copy in HEX, but it is noticed that the new data will
cover the old data every time which was saved last time.
Now , if it is need to print all the receiving data in HEX format, Press
COMPRESS
▼
key or FEED/EJECT
▲
key until the LCD shows :
Press STOP
▉
key to accept, LCD shows:
After inserting the paper, the printer will print all the receiving data in HEX
format, at the same time, LCD show:
