Globalis International
PR9 SERVICE MANUAL-VER1.1 Page 37 of 112
3.3.1.3. EXAMPLES
For example, we will modify 15CPI of OLIVETTI emulation.
After module selected, it will enter the OLIVETTI module, LCD shows:
If pressing STOP
▉
key, enter the parameter’s setup of OLIVETTI
emulation, if you want to modify CPI, pressing COMPRESS
▼
key or
FEED/EJECT
▲
key, until the LCD shows:
After pressing STOP
▉
key to make sure your operation, it will enter the
parameter’s selection, the LCD will show:
Pressing COMPRESS
▼
key or FEED/EJECT
▲
key, until the LCD shows::
After pressing STOP
▉
key , the printer will save the modified parameters
(into the RAM) and return to the upper level, LCD show::
Then, if you want to setup other parameters, you can press COMPRESS
▼
key or FEED/EJECT
▲
key to switch. Otherwise, pressing STATION 2 key
until the LCD show:
After switching by pressing COMPRESS
▼
key or FEED/EJECT
▲
key
continuously, enter the “SAVE PARAMETERS” item, the LCD will show:
◆
If you want to save the modified parameter into the Flash, pressing
STOP
▉
key, the printer will save parameter, and LCD shows:
After parameters saved, the printer will reset automatically.
◆
If you do not want to save the modified parameters
press COMPRESS
▼
key or FEED/EJECT
▲
key or STATION 2 key,
enter other items. The LCD shows:
or
or