![background image](http://html1.mh-extra.com/html/safeline/sl6/sl6_quick-manual_798565033.webp)
33
English
ENGLISH
Bus unit
*89* - - #
Selected alarm input type for the bus unit
(N/O or N/C).
First number selects the bus unit (1-6).
Second unit selects N/O (0) or N/C (1).
Voice station
- Integrated emergency bell
*90* - - #
Local configuration of emergency bell voice
station. First number selects voice station (1-
6). Second number selects Off (0 = default)
or On (1).
Pwd for remote configuration
*91* - - - - #
Change password (default=0000).
Simulate an alarm event
*94* - #
Triggers an alarm event after configuration
is terminated.
1 = Emergency call
2 = Test alarm
3 = Battery failure
4 = Microphone/speaker failure
5 = Receipt on voice call
6 = Maintenance
7 = Main unit power failure
8 = Stuck button alarm
GSM/PSTN
- RX audio level
*96*
- #
Increases the received audio level. Is used
only if the audio level from the alarm central is
to low.
0 = 0% (default)
1 = +25%
2 = +50%
3 = +75%
4 = +100%
Note.
SW 4.4 0 or later is required.
For PSTN, HW 1.41 or later is required.
Background
level compensation
*97* - #
0 = Off (default)
1 = On
Reset to default settings
*99* - #
1 = Factory standard
2 = Default P100 (The following codes
will be set): *21*0#, *22*0#, * 27*03#,
*80*1#, *84*1#, *88*1#
3 = Default CPC (The following codes will be
set): *21*3#, *22*3#, *27*03#, *80*1#,
*84*1#, *88*1#
4 = Default VOICE (The following codes will
be set): *21*1#, *22*1#, * 27*03#, *80*1#
*84*1#, *88*1#
[DOCSxxxx] SL6 Quick guide 201811.indd 33
2019-02-21 15:10