![background image](http://html1.mh-extra.com/html/safeline/sl6/sl6_quick-manual_798565030.webp)
p. 16
p.25
30
English
ENGLISH
LED indication
front panel
Continuous green
Mains power supply OK.
Flashing red (400/400 ms)
Battery operated, with power to the emergency light.
Continuous red
Battery operated, no power to the emergency light.
Fig 3.1 -
LED 1 indicates the power supply status
Light off
No active alarm/battery OK.
Rapidly flashing yellow (200/200 ms) Active alarm not reset.
Flashing red (400/400 ms)
Battery check in progress.
Continuous red
Battery test failure/no battery connected.
Fig 3.1 -
LED 2 indicates active alarm and battery condition
Flashing green (100/100 ms)
Fire mode activated.
Flashing green (400/400 ms)
Call connection in progress.
Slowly flashing green (200/4600 ms) Telephone line connected. / GSM network OK.
Continuous green
Call connected.
Flashing yellow (100/100 ms)
Incoming call.
Flashing red (400/400 ms)
No telephone line connected. / Searching for GSM network.
Continuous red
No SIM card (when using GSM).
Fig 3.1 -
LED 3 indicates the phone line's status
Press for 3 sec
Show GSM signal strength (see table below).
Press 3 times
Start a self test (b bus initialization).
Press once
Resets an active alarm. Aborts calls in progress.
Press 5 sec - release
SL6+ turns off. NOTE: refers to battery powered only
Fig 3.1 -
Reset button
Storing of two different telephone numbers, one to be answered by
P100 code and the other one with voice.
Configuration
example
If at any time you need to start
over, use the factory reset
command *99*1#.
Please refer to the full
configuration setup in the
“Parameter list” as these are
merely examples.
1.
Start configuration:
0 0
2.
1st phone number:
* 1 1 * 1 2 3 4 5 6 7 8 #
3.
2nd phone number:
* 1 2 * 2 3 4 5 6 7 8 9 #
4.
Call type 1st number:
* 2 1 * 0 #
- Example: Answered with P100 code.
5.
Call type 2st number:
* 2 2 * 1 #
- Example: Answered as voice call.
6.
Alarm button delay:
* 8 7 * 0 3 #
- Example: 3 seconds delay.
7.
End configuration:
* 0 0 * #
[DOCSxxxx] SL6 Quick guide 201811.indd 30
2019-02-21 15:10