![background image](http://html2.mh-extra.com/html/safeline/gl6/gl6_manual_3307803009.webp)
9
SafeLine GL6 v.2.1.1 EN
The GL6 can only recognize the PIN code if the code is set to
“1234”, “0000”, “1111” or if it is deactivated. If set to anything else,
the GL6 cannot use the SIM card.
If the PIN code is set to “1234”, “0000”or deactivated, the SIM card
can be used on any of SafeLine’s GSM products.
Setting the PIN code
1.
Insert the SIM card in an ordinary phone. In the phone’s
security settings, change the PIN to “1234”. If not possible,
set the PIN code to “0000” or, if available, set the ”PIN code
request” option to “OFF”.
2.
Verify the PIN code by switching your phone off and on again.
3.
Make a call from your phone to verify that the SIM card is active.
4.
Make a call to the GL6 after insertion to ensure there is a proper
connection.
“1111” PIN code
If the PIN is set to “1111”, the code will be randomly generated by
the SafeLine GSM unit and memorized. This is a safety measure,
making sure the SIM card will only work with the selected SafeLine
GSM unit. To change the PIN again, use the PUK code provided to
you by your mobile services provider for setting up a new PIN.
If you want to upload a new SIM card for the GSM unit with a new
“1111” PIN, you will first need to upload a SIM card with PIN code
“1234” or “0000” to clear the old code in memory.
Activating the
SIM card
Disconnect both mains
and battery plugs, before
inserting or removing the
SIM card.
Network
services
Only applicable for
*GL6
and
*GL6-FC
:
Before you can start using
a new SIM card, the card has to be prepared and support 2G
network. Cards that only support 3G and/or 4G will not function.
Only applicable for
*GL6-4G
and
*GL6-FC-4G
:
Network services
may differ from country to country and/or service providers.
Contact your service provider for more information about 4G and
VoLTE in your specific region.