Safelift MoveAround MA60, Оригинальное руководство пользователя

Страница: 10 / 20

10 11
5. MAINTENANCE
5.1 Blocking the platform in raised position
a) Installation of ratchet block
1. Park the machine on a fixed horizontal surface.
2. Turn the main switch to ”ON” position.
3. Raise the platform approx. 1.2 meters.
4. Place a solid ratchet block, 21 mm x 100 mm x 450 mm between
the second mast section and the chassis, just behind the mast.
5. Slowly lower the platform until the other mast section is in a
resting position on the ratchet block.
6. Turn the main switch to ”OFF” position.
b) Dismantling of ratchet block
1. Turn the key switch to ”ON” position.
2. Raise the platform stepwise until the ratchet block can be
removed.
3. Remove the ratchet block.
4. Lower the platform.
5.2 Hydraulic oil
The hydraulic oil tank is located under the steel covers on the
chassis.
Control of hydraulic oil
1. Ensure that the platform is blocked according to 5.1.
2. Remove the covers on the chassis.
3. Unscrew the tank cap
4. Check the oil level
5. If necessary, fill it with the recommended oil type:
Motorex Corex HV46 (DIN 51524/-2/-3 EN ISO 6743-4).
WARNING!
The service or maintenance on the machine must never be
performed with raised platform without having secured the
platform against unintentional lowering. Do not stand under the
platform when this is being secured in the raised position or
when it is removed.
NOTE!
Never fill the hydraulic oil when the platform is not blocked.