3
UK
Step by step installation guide
Use on cupboards and drawers where the internal surfaces of the
cabinet are flat and at least 6 cm wide. The side of the drawer
needs to be lower than the front by at least 7 cm.
Use adhesive to attach Catch to the top of the cabinet, or screws
for attaching to the side.
What’s included:
(A) 2 x Catch
(B) 2 x Hook
(C) 1 x EZ-Tool™
(D) 1 x Key
(E) 1 x EZ-Dock™
(F) 6 x Sticker
(G) 12 x Screw
The adhesive is instantly strong and can only
be positioned once, so first practice each
fitting step WITHOUT exposing the adhesive.
Before installation, clean and dry the surface
with a 50:50 solution of water plus white
vinegar or surgical spirit.
If attaching Catch to top of cabinet, peel off
the protective layer to expose the adhesive
on the Catch (A).
For cupboards, the Catch should be positioned
either into the top corner, or within 20 cm of
the opening edge of the door. Hold the Catch
diagonally against the top of the cabinet. The
thin arm should be flush with the outside of
the cabinet.
