
9
8
Fitting inside an opening
Fitting outside an opening
No skirting board
No skirting board
With skirting board or
wall sloping towards
opening
With skirting board or
wall sloping towards
opening
No Spacers required
No Spacers required
Bottom of
Hinge Rail
Bottom of
Locking Rail
Small Lower Spacer
(H1)
(If skirting is more than
14 cm
high, no Spacer
required)
Small Lower Spacer
(H1)
(If skirting is more
than
14 cm
high, no
Spacer required)
No Spacers required
Large Lower Spacer
(H2)
Small Lower Spacer
(H1)
(If skirting is more than
14 cm
high, no Spacer
required)
Small and Large
Lower Spacer
(H1 & H2)
Use the table below to decide whether you need to use Lower Spacers (H1 & H2) between the
FastMount™ Rail and the wall. If you do need to use Lower Spacers, fit them between the Rail and
the wall so that the Screws (I-L) pass through and hold them in place.
Choose the correct size Screws. Pass a Screw
through the lower hole in the Rail and any
Lower Spacer(s) required.
If fitting to wood
The Screw will need to protrude by
15 mm
.
The Screw will need to protrude by
35 mm
.
Smaller screws will be needed where no spa-
cers are used, larger ones as spacers are added.
The smaller fully serrated screw in each bag is
for use in the top of the Locking Rail.
If fitting to plaster-covered brick or concrete
9
UK