Page 10 of
18
FOR VEHICLES WITH ENGINES OR GENERATORS MOUNTED IN THE FRONT,
USE CAUTION WHEN WORKING AROUND ENGINE AND EXHAUST
COMPONENTS. COMPONENTS CAN REMAIN HOT FOR UP TO AN HOUR
AFTER ENGINE OR GENERATOR SHUTDOWN. FAILURE TO COMPLY MAY
RESULT IN INJURY.
NOTE
An installation video is available for your reference at:
https://www.youtube.com/watch?v=ysabH_SCVJM&feature=youtu.be
Since the installation video may show a different chassis and method
of installation, the video is strictly for reference only, and does not
supersede the instructions contained in this manual.
When parking vehicle, ensure that wheels are in a straight ahead
position. This can be accomplished by ensuring that your
vehicle is traveling straight ahead and stopping the vehicle with the
steering wheel in that position.
Refer to Figure 1 to familiarize yourself with hardware orientation and
installation.
1. Gain access to the underside of front axle assembly.
NOTE
Some vehicles are equipped with a factory-installed dampner. The
dampner looks similar to the SAFE T PLUS
®
unit, with one end attached
to the Tie-Rod, and the other end is usually attached to the frame of
the vehicle. If dampner is installed, remove dampner, brackets, and
mounting hardware in its entirety before continuing with procedure.
SAFE T PLUS
®
INSTALLATION
WARNING
