Part # 700-1233 R1
© Safe Fleet | All rights reserved
RGY Button
Quick Start Guide
Color
Recorder Status
Examples
Green
Recording/normal
– no video loss from any
camera; no problems with recording operation
Routine operations, including:
• recording
• warming up/booting
• shutting down
Yellow
Recording/video loss
– recording, but
experiencing video loss from one or more
cameras
Video loss on any or all channels
1
Red
Not recording
– system unable to record due
to an abnormal condition
Not recording due to:
• overheating
• drive unlocked
• drive failure
2
• other abnormal conditions
1
If the system is experiencing video loss
and
not recording, the red light displays.
2
On systems with primary storage consisting of dual media, both media must fail.
TIP: Event button - tagging video
For information about using the Event button
to flag an event, see “Tagging Video for Review”
in the recorder’s
Installation and Configuration
Guide
on the Safe Fleet Community.
TIP: Status light colors
Vehicle operators should check that the recorder status
light turns solid green approximately two minutes after
vehicle ignition is on.
A yellow or red status light should be reported to a
supervisor, and indicates the system requires attention
.
Contact Safe Fleet Technical Support
Phone:
1.844.899.7366
Email:
Warranty
For full warranty information, visit:
•
www.seon.com/documents/Seon-Warranty.pdf
Service & Support
If your RGY Button is to be returned for service, please contact the Safe Fleet Technical Support team, provide the model
and/or serial# of your unit, and ask for a
Return Merchandise Authorization (RMA)
number. An
RMA#
allows the support
team to better track your product when it comes in for service. Please show the RMA# on the
outside
of the package.
ANY PRODUCT SENT WITHOUT AN RMA# MAY BE REFUSED!
Documentation
Additional copies of this guide, along with other documentation, can be found on the Safe Fleet Community
(
https://community.safefleet.net
).
RGY Button - Status Light Indicators
Event button
Status light
