Safe Fleet PRIME DESIGN VRR3-PC11B, Руководство по сборке

Страница: 5 / 16

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118
▪
Phone: 651-552-8554
▪
Toll Free: 1.8.PRIME.RACK
▪
Fax: 651-552-1799
▪
Email: info@primedesign.net
▪
Website: www.primedesign.net
TM & © 2018 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6764268, 6971563, 2364879, 8857689, 8511525, 8991889, 2271515, 2364897, 9506292, 9481313, 9481314, 9796340, 6202807, 6427889, 9415726 AND OTHER PATENTS PENDING
5
Fig. A
Flush
Rear
Front
Fig. A
Rear
Front
Lef
t
Right
M8 X 20MM
Lock Washer
Flat Washer
Lef
t
Right
Rear
Front
Channel Rear Channel Front
(B) 48.00” (C) 24.00”
(A) 4.25”
VRR3-PC11B
ASSEMBL
Y INSTR
UCTIONS–FBM MOUNTINGS
2.2
Position the Channel ends
until contacting the End
Caps as shown in Figure A.
Torque all Mounting Bracket
Nuts to 90 in-lb
2.4
Loosen nuts
Position the rear Mounting
Brackets as shown.
Position the front and
mid Mounting Brackets
as shown.
Attach Mounting Brackets to the Aluminum
Strip Nuts located in the Channels
2.3
2.6
Position Mounting Brackets to designated dimension shown
below, then torque the M8 X 20MM bolt to 90 in-lbs. Proceed
to Step 3.1.