Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
8
USAM-FEA0002-US01 Rev-A 0719
FEA-0002
ASSEMBL
Y INSTR
UCTIONS–RO
TA
TION B
USHINGS
REAR ROTATION BUSHINGS
FRONT ROTATION BUSHINGS
6.1
6.2
Cable tie the bushings if
this is for ship-through.
Note: Cable ties are not
included in this kit.
7.1
7.2
6.3
Cable tie the bushings if
this is for ship-through.
Note: Cable ties are not
included in this kit.
7.3
White Bushing
Black Bushing–
Align bushing boss
to Crossbar notch
White Bushing
FRONT CROSSBAR CAPS
8
Some Front Crossbars may have additional drilled
holes. Press Crossbar Caps into Crossbar holes if
present and unused.
Press in Small
Crossbar Caps.
NOTE:
This completes the installation of FEA-0002. For left
side Rotation installation, repeat Steps 1.1–8 of this manual.
If applicable, refer to your next FEA Assembly Manual.
If completed, refer back to your FBM Assembly Manual, and
resume assembling at Step 3.1.
WARNING: Failure to position the Crossbars as shown in your
FBM Assembly Manual may result in damage to the sliding
door and/or ladder rack.
Black Bushing–
Align bushing boss
to Crossbar notch
