Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING
7
Torque to
80 in-lbs
4.8
Slide the L Post until parallel
to the Auto Clamp and the
gap between the two is
even from top to bottom
4.7
Repeat steps 4.1
-
4.8 for
the front L Post installation
4.9
Ensure both Z Post Mounting
Clamps are fully seated into
the top groove of the Upper
5.2
Slide the Z Post into the Mounting Clamp Assembly
5.1
Install the Z Post Mounting
Clamp Assembly onto the
Rotation Upper. Do not
tighten until Step 5.4.
Refer to the Quick
Start Guide for Z
Post positioning.
5.3
5.4
Torque to
90 in-lbs
Repeat steps 5.1
-
5.4 for
the front Z Post installation
5.5
FEA-0002
ASSEMBL
Y INSTR
UCTIONS–L & Z POSTS
Z POSTS
SEE QUICK START GUIDE FOR ADJUSTMENTS
