Safe Fleet Prime Design FBM-1067-BLK, Руководство пользователя

Страница: 6 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
6
Z Plate Cam Nut
Z Plate Cam held
in position with
19mm wrench
13mm
Cam Bolt Cap
FBM-1067-BLK
ASSEMBL
Y INSTR
UCTIONS–ERGORA
CK GUTTER MOUNTS
3.6
Verify positioning of the Front Crossbar and Mid Crossbar, then proceed
with the designated Mounting Bracket tightening sequence performed
during Steps 3.1–3.5.
3.4
Place a 13mm box
end wrench onto the
Z Plate Cam Nut
3.5
Ensure the vehicle’s roof gutter is
engaged within the Z Plate, and
the Mounting Plate is fully seated
inside the gutter.
Torque the Z Plate Cam Nut to 90
in-lbs. Repeat this procedure for
the left side Mounting Bracket.
3.7
Press Cam Bolt Caps onto Cam
Bolts to complete installation.