Safe Fleet Prime Design FBM-1067-BLK, Руководство пользователя

Страница: 5 / 12

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
5
Rear Crossbar Optional Mid-Crossbar Front Crossbar
(B) 48.00”
(A) 96.00”
(B) 48.00”
19mm or 3/4”
Z Plate Cam
FBM-1067-BLK
ASSEMBL
Y INSTR
UCTIONS–ERGORA
CK GUTTER MOUNTS
VEHICLE MOUNTING SEQUENCE
3.1
Set to distances shown below:
Beginning with the Rear Crossbar, position it on the vehicle’s
roof, then proceed to Step 3.2 to tighten the Rear Crossbar
Mounting Brackets in place. Place the remaining Crossbar(s)
onto the roof and set according to designated dimensions
shown below, but do not tighten. Proceed to your Feature
(FEA) Assembly Manual if required.
3.2
Place a 19mm or 3/4”
open end wrench onto
the Z Plate Cam
3.3
Using the wrench, rotate the
Z Plate Cam to raise and
engage the Z Plate into the
vehicle’s roof gutter.
Keep the Cam Lobe at its
highest vertical position and
inline with the Mounting
Bracket for Steps 3.4 & 3.5
Refer to the respective FEA or AR Assembly Manual(s)
included with your chosen rack configuration features.
Depending upon the features chosen, you may need to
perform a complete feature assembly onto the Crossbars as
noted in that feature’s Assembly Manual.
WARNING: Failure to position the Crossbars as shown in this
FBM Assembly Manual may result in damage to the vehicle
and/or ladder rack.
NOTE: Crossbars, Side Rails, Base, Clamp Down, or Rotation
features are not included in this FBM kit, and must be
purchased separately. To purchase applicable features and
accessories, please contact your authorized distributor, or a
Prime Design Sales & Service Representative.