Safe Fleet PRIME DESIGN AR-2010, Руководство по сборке

Страница: 4 / 8

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
4
AR-2010 ASSEMBL
Y
INSTR
UCTIONS–FULL
RA
CK ASSEMBL
Y
NOTE: The AluRack shown below is for illustrative purposes only, and shows
a combination of Standard and Heavy Duty Crossbars. Spacing and sizing
will vary according to customer needs (see Crossbar Configurations Chart
on previous page). Maximum bolt spacing between Roller and Crossbars is
24.00”. Crossbar Mounts must attach to Heavy Duty Crossbars only.
1
2
STRIP NUT INSTALLATION (FULL RACK ASSEMBLY)
ROLLER BRACKETS
Install Roller Brackets into the rear most Strip Nuts, and
align flush against the rear end of the Side Rail as shown.
Torque Roller Bracket Bolts to 90 in-lbs.
Roller Bracket
Lock Washer
Cap Head Bolt