© Safe Fleet | May 2018 | All rights reserved | Part #: 700-1111 R2
inView 360 Fusion Calibration Guide
p. 13
Setting the System for Calibration
Selecting vehicle and entering pattern info
On the Vehicle Selection screen, choose your vehicle type then click the next tab:
Vehicle Pattern Info
.
The
Vehicle Pattern Info
screen is where you’ll enter the vehicle measurements and pad information.
1. Enter your vehicle
Length
and
Width
.
2. Click the 2
Computation
buttons located to the right of the vehicle measurement fields.
3. In the
Pattern Location
area, choose your unit of measure (in or mm)
4. Enter the dimensions of your calibration pads.
5.
Enter the measurements used for your vertical and horizontal pad placement
