Safe Fleet FRC SafeTrack, Руководство по установке оборудования

Страница: 6 / 20

SafeTrack – Hardware Installation Guide
6
3.2 Mechanical Mount
Access Available Behind Mount Wall
1. Drill two holes that adhere to the dimensions of the Hub in terms
of location and size of holes.
2. Use bolts to mount the Hub to the wall
3. Secure the bolts with plain or nylon nuts and a lock washer screwed
on from the opposite side of the wall.
Access NOT Available Behind Mount Wall
1. Drill and tap four holes, that adhere to the dimensions of the Hub
in terms of location and size of holes.
2. Use a size ¼" - 20 tap to drill the hole.
3. Mount the Hub to the wall and secure using screws through the
holes
3.3 Electrical Install
3.3.1 Power Supply
The Hub operates on 12 V DC (or 24 V DC where available) Power to
Hub is drawn from the Vehicle Battery. The Hub is always powered, it will
go into sleep mode drawing ~30mA when the ignition pin is not active
SafeTrack HUB Harness Power Supply Connector
The Hub wiring harness includes a two pin deutsch connector for
power and ground